Professional Plastic Caps Injection Mold Manufacturer
- Home 〉
- Product & Service 〉
- Mold Development 〉
- Packaging Plastic Injection Mold 〉
- Plastic Caps Injection Mold
.jpg)
● Plastic Caps Injection Mold Cavity：
4 & 8 & 16 Cavities.
● Plastic Caps Injection Mold Main Material：
SUS420 HRC50˚±1˚.
● Plastic Caps Injection Mold Injection System：
Cold Runner System.
Hot Runner System (Taiwan Brand).
● Plastic Caps Injection Mold Ejection System：
Ejector Pin & Stripper Plate & Two Steps Ejector.
● Plastic Caps Injection Mold Cycle Time：
10 ~ 18 ± 2 Seconds.
● Plastic Caps Injection Mold Running：
1 year Guarantee; Shots guarantee 1 million under the normal operation and period maintenance.
● Plastic Caps Injection Mold Delivery Time：
80 ~ 100 working days to T1 sample delivery.
● Plastic Caps Injection Mold Features：
High Polish.
| Plastic Caps Injection Mold Specification |
|
Product Name |
Plastic Caps Injection Mold |
|
Plastic Caps Injection Mold Plastic Material |
PPR,PP, PP+GF, PP+ TALC,PE,ABS,POM,PPH…etc. PC, PS, PMMA for Transparent. |
|
Steel of Cavity & Core |
Depends on Product, we help customer to choose the suitable material. Commonly used material as below: Buderus: 1.2311, 1.2738, 1.2344, 1.2316, BPM-HH, SUS-420…etc. Finkl: P20, HiP-20, H13…etc. Hitach: NAK80, DAC, FDAC, SKD61…etc. Assab: 618, 718, STAVAX…etc. |
|
Steel of Mold Base |
Depends on Product, we help customer to choose the suitable material. Commonly used material is S50C. |
|
No. of Cavity |
Customized |
|
Hardness of Cavity & Core |
Pre-Hardness Steel: HRC 30 ~ 32 ± 1° Heat Treatment Steel: HRC 50~52± 1° |
|
Core pulling or Ejection system |
Depends on the Product. Commonly used : Motor, oil cylinder, stripping plate, angel pin, ejector pin…etc. |
|
Mould Accessories |
Compatible to DME/HASCO Standard. |
|
Cooling System |
In Core: Baffle or By pass cooling In Cavity Plate: Chain drilling type cooling. |
|
Surface Finish |
Depends on the product. Commonly used: Texture Hatching, EDM Hatching, Polishing, Diamond Polishing…etc. |
|
Plastic Caps Injection Mold Mold Life |
Depends on the steel hardness and the plastic material. Commonly used: 1. 300,000 ~ 500,000 shots or 1 year under normal use procedure for Pre-Hardness material. 2. 1,000,000 shots or 1 year under normal use procedure for Heat Treatment material. |
|
Runner |
1. Cold Runner. 2. Hot Runner. |
|
Plastic Caps Injection Mold Delivery time |
Depends on the product size and complication. For First trial: 45 ~ 80 days after mold drawings approved. |
|
Packing |
Standard Wooden Case |
|
Machine Center |
CNC milling machine, CNC Lathing machine, EDM, NC milling & lathing machine and so on. |
|
R & D |
We offer customers the drawings for products and mold design. Also we provide extra service such as: Reversing Engineering Drawing, Optical Design, Photometric Design… etc. We can work with 2D/3D drawings or with provided samples. |
|
Production |
We can also provide Pilot Run production and molding production. |
| Plastic Caps Injection Mold development |
■ From Raw material to finished mold, we have gone through each process with carefully fabrication and detailed design. |
| Plastic Caps Injection Mold Order Process | |
■ We accept product drawings or sample for quote evaluations. We think like a buyer, design like an operator. From inquiry to order confirm, we have already planed the most suitable solution. |
|
.jpg)
| Plastic Caps Injection Mold Shipping Process | |||
■ During shipping, package often was not carefully carried by the courier. SSB ship your product like a receiver. We have observed cost to provide a strong packing and make sure the delivery will be safe to your door. |
|||
.jpg)
